Lexmark MX432 User Manual page 84

Use printer menus
Menu item
Alarm Control
Off
Single*
Continuous
Supplies
Show Supply Estimates
Show estimates*
Do not show estimates
Supplies
Cartridge Alarm
Off
Single*
Continuous
Supplies
Custom Supply Notifications
E‑mail Alerts Setup
E‑mail Setup
Primary SMTP Gateway
E‑mail Alerts Setup
E‑mail Setup
Primary SMTP Gateway Port (25*)
E‑mail Alerts Setup
E‑mail Setup
Secondary SMTP Gateway
E‑mail Alerts Setup
E‑mail Setup
Secondary SMTP Gateway Port (25*)
E‑mail Alerts Setup
E‑mail Setup
SMTP Timeout (30*)
E‑mail Alerts Setup
E‑mail Setup
Reply Address
E‑mail Alerts Setup
E‑mail Setup
Always use SMTP default Reply Address
(Off*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the number of times that the alarm sounds when the printer
requires user intervention.
Show the estimated status of the supplies.
Set the number of times that the alarm sounds when the
cartridge is low.
Configure notification settings when the printer requires user
intervention.
Note: This menu item appears only in the Embedded Web
Server.
Type the IP address or host name of the primary SMTP server
for sending e-mail.
Enter the port number of the primary SMTP server.
Type the server IP address or host name of your secondary or
backup SMTP server.
Enter the server port number of your secondary or backup
SMTP server.
Specify how long before the printer times out if the SMTP
server does not respond.
Specify a reply address in the e‑mail.
Use the SMTP default Reply Address.
84