Lexmark MX432 User Manual page 180

Troubleshoot a problem
Error codes
12.11, 12.21
12.12, 12.22
12.91
12.92
29.08
31.40z
Error message
Change [source] to [type]
[size].
Change [source] to [type]
[size] [orientation].
Change multipurpose feeder
to [type] [size].
Change multipurpose feeder
to [type] [size]
[orientation].
Remove packaging, imaging
unit.
Reinstall missing or
unresponsive black
cartridge.
Solution
Remove paper from the indicated
tray, and then load the correct paper
type and size. For more information,
see "Loading trays" on page
Remove paper from the indicated
tray, and then load the correct paper
type and size. For more information,
see "Loading trays" on page
Remove paper, and then load the
correct paper type and size. For more
information, see "Loading the
multipurpose feeder" on page
Remove paper, and then load the
correct paper type and size. For more
information, see "Loading the
multipurpose feeder" on page
1
Open door A.
2
Remove the imaging unit.
3
Remove the toner cartridge from
the imaging unit.
4
Remove the packing material.
5
Insert the toner cartridge into the
imaging unit until it clicks into
place.
6
Insert the imaging unit, and then
close the door.
1
Open door A.
2
Remove the imaging unit.
3
Remove the cartridge from the
imaging unit.
Warning—Potential
Damage: Do not expose the
imaging unit to direct light for
more than 10 minutes. Extended
exposure to light may cause
print quality problems.
Warning—Potential
Damage: Do not touch the
photoconductor drum. Doing so
may affect the quality of future
print jobs.
4
Insert the cartridge into the
imaging unit.
5
Insert the imaging unit.
6
Close the door.
180
45.
45.
47.
47.