Lexmark MX432 User Manual page 130

Use printer menus
Menu item
Background Removal
Level (0*)
Scan Edge to Edge
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Text Default
5–95 (75*)
Text/Photo Default
5–95 (75*)
Photo Default
5–95 (50*)
Custom Job Scanning
Off*
On
Scan Preview
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Flash Drive Print
Menu item
Number of Copies
1–9999 (1*)
Paper Source
Tray [x] (1*)
Multipurpose Feeder
Manual Paper
Manual Envelope
Collate
Off [1,1,1,2,2,2]
On [1,2,1,2,1,2]*
Sides
1‑Sided*
2‑Sided
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Remove the background color or image noise from the original document.
Scan the original document from edge to edge.
Description
Set the quality of text on the scanned image.
Set the quality of text and photo on the scanned image.
Set the quality of a photo on the scanned image.
Set the printer to scan the first set of original documents using the specified
settings, and then scan the next set with the same or different settings.
Note: This menu item appears only when an ISD is installed.
Show a scan preview of the original document.
Note: This menu item appears only when an ISD is installed.
Description
Set the number of copies.
Set the paper source for the print job.
Keep the pages of a print job stacked in sequence, particularly when printing multiple
copies of the job.
Specify whether to print on one side or both sides of the paper.
130