Lexmark MX432 User Manual page 27

Set up, install, and configure
Notes:
•
When Voice Guidance is activated, always use two fingers to select any item on the display.
•
Voice Guidance has limited language support.
Deactivating Voice Guidance
1
In one motion and using one finger, slowly swipe left then up on the display until you hear a voice message.
Note: For printer models without built-in speakers, use headphones to hear the message.
2
Using two fingers, do either of the following:
•
Touch Voice Guidance, then touch OK.
•
Touch Cancel.
Note: If the gesture does not work, then apply more pressure.
You can also deactivate Voice Guidance by doing either of the following:
•
Using two fingers, double tap the home screen.
•
Press the power button to put the printer in Sleep or Hibernate mode.
Navigating the screen using gestures
Notes:
•
Most of the gestures are applicable only when Voice Guidance is activated.
•
Enable Magnification to use the zoom and pan gestures.
•
Use a physical keyboard to type characters and adjust certain settings.
Gesture
Swipe left then up using one finger
Double‑tap using one finger
Double‑tap the home icon using two
fingers
Triple‑tap using one finger
Swipe right or swipe down using one
finger
Swipe left or swipe up using one
finger
Swipe up then down using one
finger
Pan
Swipe up then right using one finger Increase the volume.
Function
Launch Accessibility mode. Use the same gesture to exit Accessibility mode.
Note: This gesture is also applicable when the printer is in normal mode.
Select an option or item on the screen.
Deactivate the Accessibility mode.
Zoom in or zoom out text and images.
Move to the next item on the screen.
Move to the previous item on the screen.
Move to the first item on the screen.
Access parts of the zoomed image that are beyond the limit of the screen.
Note: Use two fingers to drag a zoomed image.
Note: This gesture is also applicable when the printer is in normal mode.
27