Lexmark MX432 User Manual page 28

Set up, install, and configure
Gesture
Swipe down then right using one
finger
Swipe up then left using one finger
Swipe down then left using one
finger
Using the on‑screen keyboard
When the on‑screen keyboard appears, do one or more of the following:
•
Touch a key to announce and type the character in the field.
•
Drag a finger across different characters to announce and type the character in the field.
•
Touch a text box using two fingers to announce the characters in the field.
•
Touch Backspace to delete characters.
Enabling Magnification mode
1
In one motion and using one finger, slowly swipe left then up on the display until you hear a voice message.
Note: For printer models without built-in speakers, use headphones to hear the message.
2
Using two fingers, do the following:
a
Touch Magnification mode.
b
Touch OK.
Note: If the gesture does not work, then apply more pressure.
For more information on navigating a magnified screen, see
27.
Adjusting the Voice Guidance speech rate
1
From the home screen, touch Settings > Device > Accessibility > Speech Rate.
2
Select the speech rate.
Adjusting the default headphone volume
1
From the home screen, touch Settings > Device > Accessibility.
2
Adjust the headphone volume.
Note: The volume resets to the default value after the user exits Accessibility mode or when the printer
wakes from Sleep or Hibernate mode.
Function
Decrease the volume.
Note: This gesture is also applicable when the printer is in normal mode.
Exit an application and return to the home screen.
Go back to the previous setting.
"Navigating the screen using gestures" on page
28