Table of Contents
Advertisement
Troubleshoot a problem
Error codes
71.01
71.02
71.03
71.06
71.12
71.13
72.01
84.00, 84.01, 84.02, 84.09
84.11, 84.12, 84.13, 84.19
84.21, 84.22, 84.23, 84.29
84.31, 84.32, 84.33
84.41, 84.42, 84.43
88.00, 88.09
88.10, 88.19
88.20, 88.29
88.40, 88.48
Error message
Fax Station Name not set
up. Contact system
administrator.
Fax Station Number not set
up. Contact system
administrator.
No analog phone line
connected to modem, fax is
disabled.
Unable to connect to HTTPS
Fax Server.
Memory full, cannot print
faxes.
Memory full. Cannot send
faxes.
E-mail SMTP server not set
up. Contact system
administrator.
Imaging unit nearly low.
Imaging unit low.
Imaging unit very low.
Replace imaging unit,
recommended life exceeded.
Replace imaging unit to
continue printing.
Cartridge nearly low.
Cartridge low.
Cartridge very low.
Replace cartridge, 0 pages
remain.
Solution
See
"Setting up the fax function using
analog fax" on page
29.
Check the connection and the line for
a signal. For more information, see
"Setting up fax using a standard
telephone line" on page
Connection to HTTPS Fax Server is
disconnected. Check the Internet
connection of the printer.
Touch Print All to print as many of the
faxes as have been saved.
Try one or more of the following:
•
Continue and try sending the fax
again.
•
Scan the original document one
page at a time, dial the fax
number, and then scan the
document.
Try either of the following:
•
Set up your e‑mail function. For
more information, see
"Configuring the e‑mail SMTP
settings" on page
37.
•
Disable the error message. For
more information, see
the 'SMTP server not set up' error
message" on page
Touch Continue to clear the
message.
See
"Replacing the imaging unit" on
page
160.
Touch Continue to clear the
message.
See
"Replacing the toner cartridge"
on page
158.
183
32.
"Disabling
236.
Advertisement
Table of Contents
