Enable Or Disable Upnp - NETGEAR WAX630 User Manual

Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
4. Select Management > Configuration > System > Advanced > Ethernet LLDP.
The Ethernet LLDP page displays.
5. Select a radio button:
• Enable: LLDP is enabled. This is the default setting.
• Disable: LLDP is disabled.
CAUTION: If the access point receives power from a PoE switch and you disable
LLDP, power to the access point might be turned off after you click the Apply button.
In that case, restart the access point.
6. Click the Apply button.
Your settings are saved.

Enable or disable UPnP

Universal Plug and Play (UPnP) lets the access point be discovered by other devices in
a network that support UPnP. UPnP is enabled by default.
To enable or disable UPnP:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 44.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 25.
The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > UPnP.
Manage the Local Area Network
and IP Settings
145 User Manual