NETGEAR WAX630 User Manual page 13

Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
Table 1. LED descriptions
LED Icon
Power/Cloud LED
LAN 1 LED
LAN 2 LED
Hardware Overview
Color Description
Solid amber initially and then blinking amber slowly: The access
point is starting or in the process of getting an IP address.
Solid green: The access point started up and functions either as a
standalone access point or as an Insight discovered access point that
is not connected to the Insight cloud-based management platform.
Solid blue: The access point functions in Insight mode and is
connected to the Insight cloud-based management platform.
Blinking amber fast: The access point is updating firmware or is
being reset to factory default settings.
Blinking multicolor: The access point is functioning in extender mode
and the mesh setup is in progress.
Solid amber during operation: The PoE power that the access point
received is not at the 802.3bt (PoE++) level.
Off: No power is supplied to the access point.
Solid green: A 2.5 Gbps Ethernet link is detected on the LAN 1 port.
Blinking green: 2.5 Gbps traffic activity is detected on the LAN 1
port.
Solid amber: An Ethernet link at a speed lower than 2.5 Gbps is
detected on the LAN 1 port.
Blinking amber: Traffic activity at a speed lower than 2.5 Gbps is
detected on the LAN 1 port.
Off: Either no Ethernet device is connected to the LAN 1 port or no
Ethernet link is detected.
Solid green: A 1 Gbps Ethernet link is detected on the LAN 2 port.
Blinking green: 1 Gbps traffic activity is detected on the LAN 2 port.
Solid amber: An Ethernet link at a speed lower than 1 Gbps is
detected on the LAN 2 port.
Blinking amber: Traffic activity at a speed lower than 1 Gbps is
detected on the LAN 2 port.
Off: Either no Ethernet device is connected to the LAN 1 port or no
Ethernet link is detected.
13 User Manual