NETGEAR WAX630 User Manual page 190

Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
For each radio and each WiFi client, the page displays the SSID, MAC address, IP
address, host name, operating system (OS), WiFi mode, VLAN ID, and user name or
key identifier (for a Multi PSK configuration).
12. To display very detailed information about a WiFi client, click the information (I) icon
to the left of the client.
The Detailed Client Information page displays and shows the following information:
• MAC Address: The MAC address of the client.
• IP Address: The IP address associated with the client.
• Host Name: The host name of the client.
• OS: The operating system that runs on the client.
• BSSID: The BSSID that the client connects to.
• SSID: The SSID of the radio that the client connects to.
• Channel: The channel that the client connects to.
• Channel Width: The width of the channel that the client connects to.
• Tx Rate: The rate of traffic transmission of the client.
• Rx Rate: The rate of traffic reception of the client.
• RSSI: The RSSI threshold value of the client.
• Tx Bytes: The number of bytes that the client transmitted.
• Rx Bytes: The number of bytes that the client received.
• State: The QoS state of the connection.
• Type: The type of WiFi security that is used for the connection.
• Device Type: The type of device that the client is.
• Mode: The WiFi mode of the connection.
• Status: The security status of the connection.
• Idle Time: The time that the client remained idle.
• Assoc Time Stamp: The time that is associated with the information on the
Detailed Client Information page.
• PMF Support: If PMF is enabled on the access point, indicates if the client
supports PMF.
13. If you opened the Detailed Client Information page, click the Close button.
The Detailed Client Information page closes.
Monitor the Access Point and the
Network
190 User Manual