View Alarms And Notifications - NETGEAR WAX630 User Manual

Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
The Dashboard page displays.
4. Select Management > Monitoring > Wireless Bridge.
The page that displays lets you select a WDS profile (WDS 1, WDS 2, WDS 3, or
WDS 4).
5. Click the > button to the left of a WDS profile.
6. To view the function, MAC address, and IP address of an access point, point your
cursor to the access point.

View alarms and notifications

You can view the alarms and notifications from any access point page. The following
procedure describes how you can view them from the Dashboard page.
To view the alarms and notifications:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 44.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 25.
Monitor the Access Point and the
Network
198 User Manual