NETGEAR WAX630 User Manual page 86

Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
4. Select Management > Configuration > Wireless > Basic > Wireless Settings.
The following descriptions apply to all radios, but you can specify the radio settings
for the 2.4 GHz, 5 GHz high band, and 5 GHz low band radios individually.
5. Configure the following settings:
• Turn Radio ON: By default, the Turn Radio ON check box is selected and the
radio broadcasts. Turning off a radio disables WiFi access for the band, which
can be helpful during configuration, network tuning, or troubleshooting.
• Wireless Mode:
Select one of the following wireless modes (WiFi modes) for the 2.4 GHz radio:
- 11ax: 802.11ax, 802.11ng, 802.11bg, and 802.11b WiFi clients can connect
to the access point. This is the default setting.
- 11ng: 802.11ax, 802.11ng, 802.11bg, and 802.11b WiFi clients can connect
to the access point. However, the speed of 802.11ax clients is limited to the
maximum speed that is supported by 802.11ng (about 400 Mbps).
- 11bg: 802.11ax, 802.11ng, 802.11bg, and 802.11b WiFi clients can connect
to the access point. However, the speed of 802.11ax and 802.11ng clients is
limited to the maximum speed that is supported by 802.11bg (about 54 Mbps).
Manage the Basic Radio
Features
86 User Manual