NETGEAR WAX630 User Manual page 180

Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
For information about the radio settings, see Display the WiFi radio settings on page
183.
• Connection Status Information pane: This pane is in the top, left corner of the
Dashboard (if the page width on your device is sufficient; otherwise, it might be
elsewhere) and displays the following:
- Status of the connection to the NETGEAR Insight cloud-based management
platform, if any.
- Status of the Internet connection.
- Functioning mode of the access point, which is always Access Point.
- Number of clients connected to the access point.
• System Information pane: This pane is in the center at the top of the Dashboard
(if the page width on your device is sufficient; otherwise, it might be elsewhere)
and displays the following:
- System name of the access point and country or region of operation.
- Ethernet MAC address.
- The serial number.
- Device uptime.
- Firmware version.
- The date and time that the access point itself or someone manually last
checked if new firmware was available.
This pane also contains a button that you can click to check for firmware updates
for the access point. If an update is available, the Update Available button
displays. (For more information about firmware updates, see Let the access point
check for new firmware and update the firmware on page 160).
Monitor the Access Point and the
Network
180 User Manual