Register And Configure Facebook Wi-Fi For The Access Point - NETGEAR WAX630 User Manual

Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
• Remove all URLs: Select the Select All check box, and click the Remove button.
14. Click the Apply button.
Your settings are saved. WiFi clients attempting to connect to the SSID are presented
with the captive portal login page.
Register and configure Facebook Wi-Fi for
the access point
Before you can set up Facebook Wi-Fi on the access point so that you can provide
customers WiFi access by letting them check in to an existing Facebook business page
(see Set up a Facebook Wi-Fi captive portal for a WiFi network on page 107), you must
register the access point with Facebook and configure the Facebook settings. By default,
the capability to register is disabled.
To register and configure Facebook Wi-Fi for the access point:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 44.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 25.
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic > Facebook Wi-Fi.
The Facebook Wi-Fi page displays.
5. Select the Register with Facebook Wi-Fi Yes radio button.
The capability to register is enabled. By default, this capability is disabled.
Set Up and Manage a Captive
Portal
105 User Manual