NETGEAR WAX630 User Manual page 104

Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
server. Specify the following settings for each RADIUS server, as directed by the
vendor:
-
IPv4 Address: Enter the IP address of the server. The IP address is provided
by the vendor.
- Port: Enter the port number that is used by the server. The IP port number is
provided by the vendor. By default, an authentication server uses port number
1812; an accounting server uses port number 1813.
-
Password: Enter the password (shared secret) for interaction with the server.
The password is provided by the vendor.
11. Select one of the following FailSafe buttons to specify if users are allowed to reach
the splash page and access the Internet if authentication is not possible:
• Enable: If authentication is not possible—for example, because captive portal
servers do not respond—users are still allowed to access the Internet for a period
of 30 minutes.
• Disable: This is the default setting. If authentication is not possible, users cannot
reach the splash page and cannot access the Internet. Instead, they get a message
Oops. Something went wrong. Please try after some time.
12. Select one of the following Allow HTTPS buttons to specify when secure HTTP
(HTTPS) traffic is allowed to pass through:
• Enable: Before authentication occurs, HTTPS traffic is allowed to pass through.
• Disable: This is the default setting. HTTPS traffic is allowed only after
authentication occurs.
13. Configure the walled garden settings.
The walled garden specifies the external applications and sites that a user can access
from the captive portal. Generally, the vendor provides information about the
applications and sites. The vendor splash page, domain name, and authentication
servers must also be included in the walled garden. Follow the directions of the
vendor.
You can do the following to configure the walled garden:
• Add a single URL: In the right field, type the URL, press Enter, and click the Move
button.
• Add multiple URLs: In the right field, paste a list of URLs, and click the Move
button.
• Remove one or more URLs: Select the check boxes for URLs, and click the
Remove button.
Set Up and Manage a Captive
Portal
104 User Manual