Chapter 14 Manage The Advanced Radio Features - NETGEAR WAX630 User Manual

14
Manage the Advanced Radio
Features
This chapter describes how you can manage the advanced radio features of the access
point. For information about the basic radio features, see Manage the Basic Radio
Features on page 84.
CAUTION: If you change a radio feature on the 2.4 GHz radio, the change affects all
WiFi networks that broadcast on the 2.4 GHz radio. Similarly, if you change a radio
feature on a 5 GHz radio (you can configure the 5 GHz high band and 5 GHz low band
separately), the change affects all WiFi networks that broadcast on the 5 GHz high band
or low band radio. If the change is not specific to one radio, the change affects all WiFi
networks on the access point.
The chapter includes the following sections:
• Manage the advanced WiFi settings for the radios
• Manage the maximum number of clients for a radio
• Manage the broadcast and multicast settings for a radio
• Manage load balancing for the radios
• Manage sticky clients
• Manage the ARP proxy
• Manage the amount of broadcast traffic
Note: If you want to change the radio settings, use a wired connection to avoid being
disconnected when the new radio settings take effect.
Note: In this manual, WiFi network means the same as SSID (service set identifier or
WiFi network name) or VAP (virtual access point). That is, when we refer to a WiFi network
we mean an individual SSID or VAP.
220