NETGEAR WAX630 User Manual page 258

Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
Table 3. Factory default settings (Continued)
Feature
RTS threshold
Beacon interval
802.11n 256 QAM
MU-MIMO
DTIM interval
Broadcast and multicast
rate limiting
802.11h
Load balancing between
radios
Force sticky clients to
disassociate
ARP proxy
Broadcast enhancements
Wireless bridge
General security
URL filtering
RADIUS servers
Neighbor AP detection
MAC ACLs
L2 security
Factory Default Settings and
Technical Specifications
Default Setting
2.4 GHz radio: Enabled at 2346
5 GHz L radio: Enabled at 2346
5 GHz H radio: Enabled at 2346
2.4 GHz radio: 100 millisec.
5 GHz L radio: 100 millisec.
5 GHz H radio: 100 millisec.
2.4 GHz radio: Disabled (applies in 11ng WiFi mode only)
5 GHz L radio: Nonconfigurable
5 GHz H radio: Nonconfigurable
2.4 GHz radio: Enabled
5 GHz L radio: Enabled
5 GHz H radio: Enabled
2.4 GHz radio: 2
5 GHz L radio: 2
5 GHz H radio: 2
2.4 GHz radio: Enabled with a limit of 50 pps
5 GHz L radio: Enabled with a limit of 50 pps
5 GHz H radio: Enabled with a limit of 50 pps
2.4 GHz radio: Not applicable
5 GHz L radio: Disabled
5 GHz H radio: Disabled
Disabled
Disabled
Disabled
Enabled
None configured
Disabled
None configured
2.4 GHz radio: Disabled
5 GHz L radio: Disabled
5 GHz H radio: Disabled
Eight default ACLs but none configured with MAC addresses
Disabled
258 User Manual