Panasonic PT-TMZ400 Operating Instructions Manual page 91

device (hereinafter referred to as "CEC-compatible device") and to control the power on/off link status between
the projector and the CEC-compatible device.
For details on how to use the CEC function, refer to "Using HDMI-CEC function" (x page 132).
1) Press as to select [HDMI CEC].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Operating a CEC-compatible device
Operate the CEC-compatible device connected to the <HDMI IN 1> terminal or <HDMI IN 2> terminal.
[HDMI-CEC OPERATION] can be operated when HDMI1 input or HDMI2 input is selected. Switch to the input that
is corresponding to the CEC-compatible device you want to operate in advance.
1) Press as to select [HDMI CEC].
2) Press qw to select [ON].
3) Press the <ENTER> button.
f The [HDMI CEC] screen is displayed.
4) Press as to select [HDMI 1] or [HDMI 2].
f Select the input corresponding to the CEC-compatible device you want to operate.
f Proceed to Step 6) when the device to operate is displayed.
5) Press qw to switch the item.
f The devices will switch when multiple CEC-compatible devices are connected to one input.
f Select the device to operate.
6) Press as to select [HDMI-CEC OPERATION].
7) Press the <ENTER> button.
f The HDMI-CEC operation screen is displayed.
8) Select the item displayed on the HDMI-CEC operation screen to operate the device.
f Refer to the "Using HDMI-CEC function" (x page 132) for the operation details.
Note
f If no CEC-compatible device is connected to <HDMI IN 1> or <HDMI IN 2> terminal, there is no device displayed at [HDMI 1] or [HDMI 2]
and [----] is displayed.
f To exit the HDMI-CEC operation screen, press the <RETURN> button or <MENU> button.
Changing the menu code
The menu code that calls up the operation menu of the CEC-compatible device varies depending on the device
manufacturer. If you cannot call up the operation menu of a CEC-compatible device from the HDMI-CEC
operation screen, change the menu code setting.
1) Press as to select [HDMI CEC].
2) Press qw to select [ON].
3) Press the <ENTER> button.
f The [HDMI CEC] screen is displayed.
4) Press as to select [MENU CODE].
5) Press qw to switch the item.
f The items will switch each time you press the button.
f Select the menu code from [1] to [6].
Chapter 4 Settings - [PROJECTOR SETUP] menu
Enables the CEC function.
Disables the CEC function.
ENGLISH - 91