Panasonic PT-TMZ400 Operating Instructions Manual page 154

Standby mode power consumption
Width
Standard
Height
outside
dimensions
Depth
Weight
*1
Materials
Outer case
Color
Power cord length
Laser Class
Laser
Classification
Risk Group
Compliance standards
Transmission method
Frequency range
(Channel)
Wireless
LAN
*2
Data transfer speed
(Standard value)
Encryption method
Power requirements
Operating range
Remote
control
Weight
Outside dimensions
*1 Average value. Weight varies for each product.
*2 To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module (Model No.: AJ-WM50).
Note
f The model numbers of accessories and optional accessories are subject to change without prior notice.
154 - ENGLISH
Chapter 7 Appendix - Specifications
Approx. 0.5 W
Approx. 14 W
Approx. 45 W
PT-TMZ400
Approx. 72 W
PT-TMW380,
Approx. 60 W
PT-TMX380
349 mm (13-3/4")
138 mm (5-7/16") (with legs at shortest position)
370 mm (14-9/16")
Approx. 4.9 k] (10.8 lbs.)
Molded plastic
White
India: 3.0 m (118-1/8")
Other countries or regions: 2.0 m (78-3/4")
Class 1 (IEC/EN 60825-1:2014)
Risk group 2 (IEC 62471-5:2015)
IEEE802.11b/g/n
DSSS, OFDM
2 412 MHz to 2 462 MHz (1 to 11ch)
IEEE802.11n Maximum 144 Mbps
IEEE802.11g Maximum 54 Mbps
IEEE802.11b Maximum 11 Mbps
WPA2-PSK (AES)
DC 3 V (AAA/R03/LR03 battery x 2)
Within approx. 20 m (65'7") (when operated directly in front of signal receiver)
63 ] (2.22 ozs.) (including batteries)
Width: 44 mm (1-23/32"), Height: 105 mm (4-1/8"), Depth: 20.5 mm (13/16")
When [STANDBY MODE] is set to [ECO]
When [STANDBY MODE] is set to [NORMAL] and [IN
STANDBY MODE] of [AUDIO SETTING] is set to [OFF], <USB
(VIEWER/WIRELESS/DC OUT)> terminal is not in use, and
[QUICK STARTUP] of [ECO MANAGEMENT] is set to [OFF]
When [STANDBY MODE] is set to [NORMAL], [IN STANDBY
MODE] of [AUDIO SETTING] is set to [ON], <USB (VIEWER/
WIRELESS/DC OUT)> terminal supplies power (2 A), and
[QUICK STARTUP] of [ECO MANAGEMENT] is set to [OFF]
When [STANDBY MODE] is set to [NORMAL], [IN STANDBY
MODE] of [AUDIO SETTING] is set to [ON], <USB (VIEWER/
WIRELESS/DC OUT)> terminal supplies power (2 A), and
[QUICK STARTUP] of [ECO MANAGEMENT] is set to [ON]