Panasonic PT-TMZ400 Operating Instructions Manual page 119

[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1
2
3
4
5
6
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the firmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [PICTURE MODE]
Displays the setting status of [PICTURE MODE].
5 [LIGHT POWER]
Displays the setting status of [LIGHT POWER].
6 [INPUT]
Displays the status of the selected input.
7 [SERIAL NUMBER]
Displays the serial number of the projector.
8 [SHUTTER]
Displays the status of the shutter. ([CLOSE]: Shutter function
enabled; [OPEN]: Shutter function disabled)
9 [VOLUME]
Displays the volume status.
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the [SELF TEST] display field of the [Projector status]
screen, click it to display the content of the error/warning.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
PT-TMZ400
1 Display of error information
Displays the alphanumeric symbols and content of errors/
warnings that occur. For the details of the display content, refer to
"[SELF TEST] display" (x page 142).
Chapter 5 Operation of Function - Web control function
PT-TMZ400
Error （ Detail ）
10 [LIGHT OUTPUT]
Displays the setting status of [LIGHT OUTPUT].
11 [INTAKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the projector.
12 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
13 [LIGHT TEMPERATURE1] / [LIGHT TEMPERATURE2]
Displays the temperature status of light source 1 and light
source 2.
14 [LIGHT]
Displays the lighting status and runtime of the light source.
15 [SELF TEST]
Displays the self-diagnosis information.
16 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
PT-BMZ61C
2 Error code
7
8
9
10
11
12
13
14
15
16
1
2
Error （ Detail ）
ENGLISH - 119