Section 12: Connect The Command Centre - Zenith HydroTap G5 Installation Instructions Manual

SECTION 12: Connect the Command Centre

Generic installation instructions
For HydroTap, mixer tap and any optional accessories, use
instructions supplied with individual kit components.
Mains power cable
Do not connect to the mains
socket until commissioning
Installation diagrams are for illustrative purposes only.
!
Hoses are not shown to scale and cannot be lengthened.
Tips for hose connection
• Push the silicone hose over the
connector for a minimum of 15mm.
• Ensure there a constant fall from the
tap down to the command centre.
• Hoses must be trimmed to avoid
loops and kinks. Take care when
positioning before cutting and
make a clean cut straight across the
hose, using a sharp blade.
• The hoses must not be under
tension when installed.
USB
Tap
Command
807042NZ v1.02 08.22 HydroTap G5 UltraCare Install Instructions
HydroTap
Centre
Braided hose
Connections key
19