Step 1 - Measure And Cut All The Tap Holes Before Fitting The Taps Section 1 - Tap Installation Instructions - Zenith Hydrotap G4 Celsius Installation Instructions Manual

Special Tools Required:
In addition to normal tools, the following will be required:
• 35mm diameter sheet metal hole punch for sink tops. (Not supplied)
• 35mm diameter hole saw for timber bench tops. (Not supplied)
• 42mm AF tube spanner or wrench (Not supplied) for fixing tap assembly.
NOTE: Taps are available with ARC or CUBE neck options.
Hole positioning:
Position the tap such that it dispenses
into the sink bowl.
Double Bowl
35mm hole
Page 10 of 28
Section 1
Tap Installation
802149NZ - BHA; CHA; CSHA -Installation Instructions - Aug 2015 - V2.00