Zenith HydroTap G5 Installation Instructions Manual page 9

UltraCare Command Centre
Boiling water (cups per hour)*
Chilled water (glasses per hour)*
Power rating @ 220-240V, 50Hz
(kW)
Power rating @ 220V, 60Hz (kW)
Dimensions (W x D x H) (mm)
Dry weight (kg)***
Ambient operating temperature
Boiling water temperature setpoint
Chilled water temperature setpoint
Chilled water coolant
* 1 cup = 167 mL, 1 glass = 200mL
** power rating of the Booster
*** Add 5 kg when full of water
# including vent tray
UV-C Module***
Rated service flow
Maximum working pressure (applies
to UV-C Module, not Command
Centre)
Maximum operating temperature
Operating voltage
***This Class B system or component conforms to NSF/ANSI 55 for the supplemental
bactericidal treatment disinfected public drinking water or other drinking water that
has been tested and deemed acceptable for human consumption by the state or local
health agency having jurisdiction. The system is only designed to reduce normally
occurring non-pathogenic nuisance microorganisms. Class B systems are not intended
for treatment of contaminated water.
SECTION 4: Technical data
807042NZ v1.02 08.22 HydroTap G5 UltraCare Install Instructions
BCU40 BCU60
160 160
125 175
1.97 2.1
1.84 2.0
395 x 464 x 333
With Duct and Vent Tray:
450 (500) # x 464 (520)
30
5 - 35 °C
98°C
5 - 9°C
R134a or R290
Specification
2.8 L/min
830 kPa
50 °C
12 V DC
BCU100
240
175
2.1 + 2.2**
2.0 + 2.2**
# x 333 (373) #
09