Table of Contents
Advertisement
Generic installation instructions
For HydroTap, mixer tap and any optional accessories, use
instructions supplied with individual kit components.
Mains power cable
Do not connect to the mains
socket until commissioning
Installation diagrams are for illustrative purposes only.
!
Hoses are not shown to scale and cannot be lengthened.
Tips for hose connection
• Push the silicone hose over the
connector for a minimum of 15mm.
• Ensure there a constant fall from the
tap down to the command centre.
• Hoses must be trimmed to avoid
loops and kinks. Take care when
positioning before cutting and make
a clean cut straight across the hose,
using a sharp blade.
• The hoses must not be under tension
when installed.
Quick Start Installation Guide
16
806836NZ v1.02 02.22 G5 B BA Quick Start Guide
SECTION 11: Connect the Command Centre
USB
Tap
Command
Centre
Braided hose
HydroTap
Connections key
Advertisement
Table of Contents
