Zenith HydroTap G5 Installation Instructions Manual page 23

Command centre
Hide thumbs Also See for HydroTap G5:
Table of Contents

Advertisement

• Touch the arrow to continue when ready
to start using the HydroTap.
• Touch the date and time, use "-" or "+" to
make adjustments. When ready, touch
the arrow to continue.
• Select 'Sink / Container' or 'Font'
depending on the model , see below.
• Select 'Font' if the HydroTap is mounted
on a font.
• Select 'Sink / Container' if the HydroTap
is mounted such that the waste water
dispenses into a sink, or container.
• Note This selection will determine if water is dispensed automatically or
requires operation of the tap during the tank flush process.
• Touch the arrow to continue.
Quick Start Installation Guide
807042NZ v1.02 08.22 HydroTap G5 UltraCare Install Instructions
SECTION 13: Commissioning
Font
Sink
Your HydroTap is designed to be used frequently,
do not commission until ready for use.
Please follow commissioning guidelines
06
Does your tap drain into a:
Sink/Container
If you are not clear on your selection options
refer to the commissioning instructions.
Container
COMMISSIONING
12:12 PM
in the manual.
DATE & TIME
Dec
2021
24 hr
:
10
50
Time
DRAIN AWAY OPTION
Or
Font
10:50
9:26
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ultracare bcu40Ultracare bcu60Ultracare bcu100

Table of Contents