Multitech MultiModem iSMS SF 100-G User Manual For System Administrators page 88

Sending to Multiple Numbers, Address Book Recipients or Groups
An SMS can be sent to multiple numbers, address book names and groups using a single API.
HTTP API format is:
http://192.168.2.1[:portnumber]/sendmsg?user=xxx&passwd=xxx&cat=1[&en
c=0][&priority=1][&modem=8]&to="xxx1","xxx2","xxx3"&ton="name1","name
2"&group="admin","rd","market"&text=message
xxx1, xxx2 and xxx3 are mobile numbers.
name1 and name2 are names in the Address Book.
admin, rd and market are groups present in the MultiModem iSMS.
Note:
Response from the MultiModem iSMS after Submitting the Send SMS API
The MultiModem iSMS returns a unique identifier; i.e. an API message ID for each "Send API request".
This ID can be used to track and monitor any given message.
Multi-Tech Systems, Inc.
Downloaded from Elcodis.com electronic components distributor
•
Modem Modem index to send SMS
Range : 1 to 4 for SF400
1 to 8 for SF800
0 for any modem
Specifying modem for a cat=3 job is not applicable. Action trigger is executed even if
modem is specified.
•
text The trigger message text to be sent.
Enable Extended ASCII in the MultiModem iSMS to send both ASCII and extended
ASCII chars.
By default, Extended ASCII is disabled, and the message can have only ASCII
characters.
If Unicode is enabled(if enc is not specified in request), SMS text should be only in
Hexadecimal form.
If Extended ASCII is disabled, a maximum of 160 characters can be sent.
If Extended ASCII is enabled, a maximum of 140 characters can be sent.
If Unicode is enabled, a maximum of 70 characters can be sent.
The API can be used to send an action trigger to the MultiModem iSMS. If the
MultiModem iSMS has a configured action trigger, it will perform the configured
action.
The to, ton and group parameters should be enclosed in quotes.
ID: apimsgid
-or-
Err: error code
e.g.,
ID: 1
Err: 601
MultiModem® iSMS User Guide for Administrators
Appendix A – Application Programming Interface (API)
88