Multitech MultiModem iSMS SF 100-G User Manual For System Administrators page 19

5. The Internet Protocol (TCP/IP) Properties screen.
Important Note:
record this information for future reference (i.e., after the MultiModem iSMS is configured, you
may wish to return this PC to its original settings).
•
•
•
•
Multi-Tech Systems, Inc.
Downloaded from Elcodis.com electronic components distributor
If this screen opens and displays your current IP configuration, we suggest you
To set a Fixed IP Address for the workstation, select Use the following IP address.
Enter the workstation IP Address. Example: 192.168.2.x.
∗
Note: The x in the address cannot be the number 0, 1, 255 or any number already in use
by a computer or device on this network.
Enter the workstation Subnet Mask 255.255.255.0
∗
Enter the workstation Default Gateway. This can be left blank when the MultiModem
∗
iSMS is on the same network and subnet.
Note: The workstation settings must be in the same subnet range as the MultiModem
iSMS.
The factory default settings for the MultiModem iSMS are:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.2
Use the following DNS server addresses.
For initial communication with the MultiModem iSMS, DNS information is not needed.
∗
These settings can be left as is.
Click OK.
∗
Close the Local Area Properties screen by clicking OK.
Close the Control Panel.
MultiModem® iSMS User Guide for Administrators
Chapter 2 – Getting Started
19