Multitech MultiModem iSMS SF 100-G User Manual For System Administrators page 56

Intelligent sms server
Hide thumbs Also See for MultiModem iSMS SF 100-G:
Table of Contents

Advertisement

Chapter 4 – Using the Web Interface
Triggers > Broadcast Triggers Continued
Add a Broadcast Trigger
Note that the fields marked with an asterisk are required. This is a setup screen; no messages are
sent from this screen.
Trigger Message
Type in a code or word that will be used to trigger the sending of the Broadcast Message.
Broadcast Message
Type in a message that will be broadcast when the trigger code or word is received, or click Pre-
Configured Message if you want to use one of these messages as your broadcast message.
Encoding Type
Select the encoding type to be used from ASCII, Extended ASCII or Unicode. This applies to both
the Trigger Message and the Broadcast Message. The received trigger message must be encoded
in the same format as specified in the Broadcast Trigger, otherwise the trigger will not match and
the broadcast message will not be sent. Default is ASCII.
To
Select the Groups who will receive this broadcast message. Click Groups to display your list of
group choices. If you change your mind, you can highlight the name of a group and click Delete to
remove a group from the list.
Authenticate
Check the Authenticate box if you want this trigger code or word and the broadcast message to be
managed by the authentication function. If this option is not enabled (unchecked), upon receipt of
the Trigger Message the broadcast is initiated.
When this option is enabled, the sender of the Trigger Message (phone number) is verified to be
listed as an "Authentic User" before the broadcast is initiated. If the Sender is not Authentic, the
broadcast is not performed.
Authentic Users
Select the Authentic Users who are allowed to trigger a broadcast message.
Priority
Select a priority level from Low, Normal or High. Default is Normal.
Save or Cancel
Click the Save button, or if you change your mind and do not want the information saved, click
Cancel.
Multi-Tech Systems, Inc.
MultiModem® iSMS User Guide for Administrators
56
Downloaded from
Elcodis.com
electronic components distributor

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multimodem isms sf 400-gMultimodem isms sf 800-g

Table of Contents