Multitech MultiModem iSMS SF 100-G User Manual For System Administrators page 81

Sending to a Group
The API can be used to send SMS to a pre-defined group. The group should exist in the MultiModem
iSMS. If the group does not exist, the message is dropped.
HTTP API format is:
http://192.168.2.1[:portnumber]/sendmsg?user=user1&passwd=user1&cat=1
[enc=1][priority=1][&modem=4]&group="admin"&text=message
-or-
http://192.168.2.1[:portnumber]/sendmsg?user=user1&passwd=user1&cat=1
[enc=2][priority=1][&modem=4]&group="admin"&text=41;42;645;0645(hexad
ecimal form)
-or-
http://192.168.2.1[:portnumber]/sendmsg?user=user1&passwd=user1&cat=1
[enc=3][priority=1][&modem=4]&group="admin"&text=65;66;678(decimal
form)
The parameters are:
•
•
•
Multi-Tech Systems, Inc.
Downloaded from Elcodis.com electronic components distributor
cat 1
enc Encoding type to send SMS(Optional field)
Range: 0 to 3
0 - SMS text should be in ASCII form
1 - SMS text should be in Extended ASCII form
2 - SMS text should be in hexadecimal form (i.e. each hexadecimal value length
should be maximum 4, and each hexadecimal value should be separated by
a semi-colon. Example: 0645;41;646)
3 - SMS text should be in decimal form (i.e. each decimal Value length should
be maximum 5, and each decimal value should be separated by a semi-colon
Example: 1605;65;65300)
Note: Maximum decimal value allowed is 65535.
If enc is not specified in the send API request, default enc will be the configured
settings from the SMS settings page.
i.e. enc=2, if Unicode is enabled.
enc=1, if Extended ASCII is enabled.
enc=0, if both Extended ASCII and Unicode are disabled.
priority Priority to send SMS(Optional field)
Range: 1 to 3
1 - Low Priority
2 - Normal Priority
3 - High Priority
If priority is not specified in the request, the default priority is normal.
MultiModem® iSMS User Guide for Administrators
Appendix A – Application Programming Interface (API)
81