Multitech MultiModem iSMS SF 100-G User Manual For System Administrators page 46

Unicode Configuration
Unicode
Enabling this mode allows the MultiModem iSMS to pass characters encoded via UTF16 (2 byte
characters 0x0001 through 0xFFFF). Select this check box and click the Save button to allow Unicode
text in the SMS messages.
Set as Factory Default
Select this check box and click the Save button to set Unicode as the factory default. This option is
used when performing a "Reset to Factory Defaults". This option is ignored and overwritten when
invoking the "Reset MultiModem iSMS Defaults" option.
Save
Click the Save button to set each changed setting before navigating away from this page.
Date Configuration
Select the format that you want the date to be presented as. Options are: dd/mm/yyyy; mm/dd/yyyy;
and yyyy-mm-dd (where dd represents the day as 2 digits, mm represents the month as 2 digits and
yyyy represents the year as 4 digits).
Save
Click the Save button.
Periodic Re-registration
Enabling this feature causes all modems in the unit to re-register (un-register and then reconnect) with
the cellular network at the selected interval. Use of this feature can prevent the appearance of the
MultiModem iSMS Server being 'camped' onto the network. The MultiModem iSMS is a stationary,
24/7 device and some cellular networks implement rules that limit the max duration a device can be
continuously registered. You can select the status of re-registration to one of several times (in hours)
or Disabled. This defaults to Disabled.
Save
Click the Save button.
Multi-Tech Systems, Inc.
Downloaded from Elcodis.com electronic components distributor
MultiModem® iSMS User Guide for Administrators
Chapter 4 – Using the Web Interface
46