Multitech MultiModem iSMS SF 100-G User Manual For System Administrators page 29

Intelligent sms server
Hide thumbs Also See for MultiModem iSMS SF 100-G:
Table of Contents

Advertisement

E-Mail Notification
SMTP Server
Enter the IP address or the resolvable name (e.g. smtp.yourdomain.com) of your mail server.
Port
Enter the port number on which the mail server listens. Example: 25. Click the Save button.
SMTP Server Authentication
Some mail servers accept connection only after a user name and password are authenticated. If
your server requires this, check the SMTP Server Authentication box. Then enter the User Name
and Password in the next fields.
User Name
If your mail server accepts connection only after a user name and password are authenticated,
enter the user name.
Password
If your mail server accepts connection only after a user name and password are authenticated,
enter the password. Click the Save button.
E-Mail Address
Enter the e-mail addresses of the individuals to whom notifications regarding the log file being full,
an invalid Telnet login, or an invalid Web login should be sent. In addition, the administrator may
want use their office e-mail address, home e-mail address, etc. Enter the addresses in proper
user@domain format. Click the Save button after each entry. An address can be deleted or
changed at any time.
Note that at least one e-mail address must be entered in this field.
Configure E-Mail Notification
Select the types of notifications that you want sent to individuals listed above. Click the Add
button. Each entry will then move to the Send E-Mail Notification For box. A notification can be
removed by clicking the Delete button. The entry will then move back to the Don't Send E-Mail
Notification For box.
The following are defaulted for Don't Send E-Mail Notification:
Administrator E-Mail ID
Enter the administrator's e-mail identification. This is the name/address that will display in the
FROM line of the notification emails. This will allow the recipients of the notifications to direct
questions or comments to the administrator. Enter the email ID in proper user@domain format.
Click the Save button. The address can be deleted or changed at any time.
A Note about E-Mail Notification
E-Mail notification is delivered through the Ethernet network, not through the wireless cellular
connection.
Multi-Tech Systems, Inc.
Downloaded from
Elcodis.com
electronic components distributor
Log File Full
1.
Invalid Telnet Login
2.
Invalid Web Login
3.
MultiModem® iSMS User Guide for Administrators
Chapter 4 – Using the Web Interface
Administration > System Setup
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multimodem isms sf 400-gMultimodem isms sf 800-g

Table of Contents