Multitech MultiModem iSMS SF 100-G User Manual For System Administrators page 80

•
•
•
If the spanned SMS value is more than 1, the maximum number of characters allowed for each
encoding scheme is defined as follows (where n represents the span value):
Any characters entered beyond the allowed limit will be chopped off.
Multi-Tech Systems, Inc.
Downloaded from Elcodis.com electronic components distributor
modem Modem index to send SMS (this is only for the SF 400/800 models)
Range : 1 to 4 for SF 400
1 to 8 for SF 800
0 for any modem (Send API job will be distributed via all the available
modems)
If modem is not specified in the request, send API job will be distributed via all the
available modems
ton The name in the address book where the SMS is to be delivered must be given within
double quotes. The maximum size of each recipient's name is 50 bytes.
text The message text to be sent.
Enable Extended ASCII in the MultiModem iSMS to send both ASCII and extended
ASCII characters. By default, Extended ASCII is disabled and the message can have
only ASCII characters.
If Unicode is enabled(if enc is not specified in request), SMS text should be only in
Hexadecimal form.
If Extended ASCII and Unicode are disabled and spanned SMS value is 1, a
maximum of 160 characters can be sent.
If Extended ASCII is enabled and spanned SMS value is 1, a maximum of 140
characters can be sent.
If Unicode is enabled and spanned SMS value is 1, a maximum of 70 characters
can be sent
ASCII – n * 154 characters
Extended ASCII – n * 134 characters
Unicode – n * 64 characters
MultiModem® iSMS User Guide for Administrators
Appendix A – Application Programming Interface (API)
80