Safety Precautions - Konica Minolta CL-200A Instruction Manual

Chroma meter
Table of Contents

Advertisement

• To ensure correct use of this instrument, read the following points carefully and adhere to them. After
you have read this manual, keep it in a safe place where it can be referred to anytime a question arises.
WARNING
Do not use the instrument in places
where flammable or combustible gases
(gasoline fumes etc.) are present. Doing
so may cause a fire.
Always use the AC adapter supplied as a
optional accessory, and connect it to an AC
outlet of the rated voltage and frequency.
Using a non-specified AC adapter or
connecting it to an incorrect AC outlet may
damage the instrument or AC adapter,
causing a fire or electric shock.
If the instrument will not be used for a
long time, disconnect the AC adapter
from the AC outlet. Accumulated dirt or
water on the prongs of the AC power
cord's plug may cause a fire and should
be removed.
Take speacial care not to allow liquid or
metal objects to enter the instrument.
Doing so may cause a fire or electric
shock. Should liquid or metal objects
enter the instrument, turn the power OFF
immediately, remove the batteries (or
disconnect the AC adapter from the AC
outlet), and contact the nearest Konica
Minolta-authorized service facility.
Do not forcibly bend, twist or pull the
power cord. Do not place heavy objects
on, or damage or modify the power cord.
Doing so may damage the power cord
and cause fire or electric shock.
Always disconnect the power cord by
holding the power plug. Pulling the
power cord itself may damage it and
cause fire or electric shock. Do not insert
or disconnect the power cord plug with
wet hands. Doing so may cause electric
shock.
CAUTION
Do not use batteries other than those specified by KONICA MINOLTA. When installing
batteries in the instrument, make sure that they are correctly oriented according to the (+)
and (-) marks. Also make sure not to mix new and old batteries, or mix batteries of different
types. Failure to adhere to these instructions may cause batteries to explode or leakage of
electrolyte, resulting in fire, injury or air pollution.
The socket-outlet shall be installed near the machine and shall be easily accessible.

SAFETY PRECAUTIONS

(Failure to adhere to the following points may result in death or serious injury.)
(Falling to adhere to the following points may result in injury or damage to the
instrument or other property.)
D o n o t d i s a s s e m bl e o r m o d i f y t h e
instrument or the AC adapter. Doing so
may cause a fire or electric shock.
The instrument should not be operated if it
is damaged or AC adapter is damaged, or
if smoke or odd smells occur.
D o i n g s o m a y r e s u l t i n a f i r e . I n
such situations, turn the power OFF
immediately, remove the batteries (or
disconnect the AC adapter from the AC
outlet), and contact the nearest Konica
Minolta-authorized service facility.
Do not put the batteries on a fire,
charge them (if they are not chargeable),
short-circuit them, heat them or disassemble
them. Doing so may cause an explosion or
heat generation, resulting in fire or injury.
Should liquid leak from batteries and
contact to eye, wash liquid off with
clean water without rubbing eyes and
immediately seek for medical professional's
advice. In case liquid contacts with hand
or clothes, wipe it off with plenty of water.
Avoid further use of such unit.
Dispose of batteries used in the instrument
correctly. Disposing of batteries incorrectly
may result in heat generation or cause
batter ies to catch fire due to shor t
circuiting. This may result in a fire, injury, or
burns. Disposal methods for batteries may
vary according to where you live. Dispose
of batteries in accordance with local
regulations or through a registered waste
disposal agency.
Do not touch or hold the batteries with
wet hands. Doing so may cause electric
shock or failure.
1

Advertisement

Table of Contents
loading

Table of Contents