Adjusting The Interior Lighting; Changing Bulbs - Mercedes-Benz Metris 2021 Operating Instructions Manual

80 Light and vision
Adaptive Highbeam Assist is only an aid. You are
responsible for ensuring correct vehicle lighting
in accordance with the prevailing light, visibility
and traffic conditions.
The system's optical sensor is located behind the
windshield near the overhead control panel.
Switching Highbeam Assist on/off
Requirements
The light switch is in the à position.
R
To switch on: switch on high beam using the
#
combination switch.
If high beam is automatically switched on in
darkness, the _ indicator lamp on the
multifunction display will light up.
To switch off: switch off high beam using the
#
combination switch.

Adjusting the interior lighting

Adjusting the interior lighting
Front overhead control panel
Interior lighting buttons (example: comfort over‐
head control panel)
1p Front left reading lamp
2| Automatic interior lighting control
3c Front interior lighting
4w Rear compartment or cargo compart‐
ment lamp
5p Front right reading lamp
To switch on/off: press the corresponding
#
button 1 – 5.
The layout and number of buttons depend on the
equipment.
Operating unit in the grab handle
1p Rear compartment reading lamp
To switch on/off: press button 1.
#
Operating unit in the cargo compartment
1c Cargo compartment lamp
To switch on/off: press button 1.
#
If your vehicle is equipped with a cargo compart‐
ment lamp with a button, you can switch all cargo
compartment lamps on and off by pressing the
c button on this cargo compartment lamp.
Regardless of the switch position, you can switch
the cargo compartment lamp on and off centrally
by pressing the w button on the overhead
control panel.

Changing bulbs

Notes for replacing light bulbs
& WARNING Risk of burns from hot com‐
ponent parts whilst replacing a bulb
Bulbs, lamps and plug connectors can
become very hot during operation.