Table of Contents
Advertisement
cally be kept constant. The system automatically
regulates the temperature of the dispensed air,
the airflow and the air distribution.
Automatic mode for automatic climate control
settings can be activated or deactivated only on
the first menu level. If you do not set a new value
for the rear-compartment climate control in the
second menu level within approximately ten sec‐
onds, the control panel display will go back to the
first menu level.
Set the desired temperature (
#
To switch automatic mode on/off: press
#
the à button.
When the indicator lamp on the à button
lights up, automatic mode is switched on. Air‐
flow and air distribution are regulated auto‐
matically. The "defrost windshield" function is
switched off.
If you deactivate automatic mode, the automatic
climate control will save the current settings.
In automatic mode, if you adjust the airflow or air
distribution manually, the indicator lamp above
the à button will go out. The function that has
not been changed manually, however, will con‐
tinue to be regulated automatically.
Information on the air distribution settings
In all air distribution settings, the side windows
are supplied with air via the side air vents to pre‐
vent them from fogging up.
Heating or dual-zone automatic climate control
¯ Directs air to the defroster vents
P Directs air to the center and side air vents
O Directs air to the footwell vents
3-zone automatic climate control
¯ Directs air to the defroster vents
b Directs air to the defroster, center and
side air vents
_ Directs air to the defroster, center, side
and footwell vents
a Directs air to the defroster and footwell
vents
P Directs air to the center and side air vents
S Directs air to the center, side and footwell
vents
O Directs air to the footwell vents
Setting the air distribution
Requirements:
The climate control system is switched on.
R
Heating or dual-zone automatic climate con‐
trol
Press the P, O and/or ¯ button.
#
If the indicator lamp in a button lights up, the
air is directed to the corresponding air vents.
3-zone automatic climate control
page 93).
/
Press the Ä 9 or Ä : button to
#
set the air distribution.
The control panel display shows the corre‐
sponding air distribution symbol.
Setting the airflow
Requirements:
The climate control system is switched on.
R
Heating or dual-zone automatic climate con‐
trol
To increase or decrease: turn the airflow
#
control clockwise or counter-clockwise to the
desired level (
Vehicles with rear climate control: the set level
will also be adopted for the rear compartment.
3-zone automatic climate control
To increase or decrease: press the K or
#
I button.
The control panel display will show the airflow
control setting as a bar graph.
Vehicles with rear climate control: press the /
button to set the airflow for the rear compart‐
ment. When the indicator lamp on the button
flashes, you can set the airflow.
Setting the temperature
Requirements
The climate control system is switched on.
R
Heating or dual-zone automatic climate con‐
trol
To increase or decrease: turn the tempera‐
#
ture control counter-clockwise or clockwise
(
/
3-zone automatic climate control
You can set the temperature separately for the
driver's and front passenger sides. In vehicles
Climate control
page 90).
/
page 90).
93
Advertisement
Table of Contents
