Table of Contents
Advertisement
Map and compass
Using the map
You can use the map for the following:
Navigating along a route
R
If no route is activated, displaying the map of
R
the area
Press on z.
#
Tap on any point on the map.
#
The following options are available:
Move the map to the left, right, up or down.
R
To enlarge or reduce the view, select c or
R
X.
To switch between 2D and 3D view, select
R
or 3D.
To rotate the map, select è.
R
To filter the POIs shown according to cate‐
R
gory, select U *
Places along the
To start a route, select a location on the map
R
and then press Go!.
Adjusting the map
Adjusting the map layers
You can customize which data is displayed on the
map, e.g. symbols for POIs and road conditions.
Select i *
Settings
#
*
Map and Vehicle
*
Tap on the checkboxes of the layers that are
#
to be displayed on the map.
Changing the map data fields
Select a data field on the map.
#
Select a data type to be displayed.
#
Changing the map perspective
Select i *
Settings
#
*
Map and Vehicle
*
Tap on the checkboxes of the layers that are
#
to be displayed on the map.
The following options are available:
Track
Up: The map is displayed in two dimen‐
R
sions with the direction of travel at the top.
North
Up: The map is displayed in two dimen‐
R
sions, with North at the top.
3D: The map is displayed three-dimensionally.
R
Split
Screen: The map window is displayed
R
alongside other applications.
Setting functions for smartphones
& WARNING Risk of distraction from oper‐
If you operate communication equipment
integrated in the vehicle when driving, you
could be distracted from the traffic situation.
This could also cause you to lose control of
the vehicle.
#
#
2D
Observe also the legal requirements for the coun‐
try in which you are driving.
road.
Requirements
Bluetooth
available in conjunction with a Bluetooth
ble smartphone.
R
R
*
Navigation
Map
Layer.
Pairing smartphones
#
#
#
%
*
Navigation
#
Driving Map
View.
#
Canceling smartphone pairing
#
#
#
Placing a call
#
Multimedia system 161
ating integrated communication equip‐
ment while the vehicle is in motion
Only operate this equipment when the
traffic situation permits.
If you cannot be sure of this, stop the
vehicle whilst paying attention to road
and traffic conditions and operate the
equipment with the vehicle stationary.
®
mode via the multimedia system is
The smartphone is in the vehicle close to the
multimedia system.
®
The Bluetooth
function of the multimedia
system is switched on.
Press on %.
Select
Connect Phone
*
®
Activate Bluetooth
on your smartphone and
make your smartphone visible for other devi‐
ces.
You can find additional information in the
instruction manual for your smartphone.
Select the name for your smartphone on the
multimedia system.
Follow the instructions on the media display
to complete the pairing procedure.
Press on %.
Select Z next to the paired smartphone.
Select
Forget This
Device.
Press on %.
®
-capa‐
Add a
device.
Advertisement
Table of Contents
