Table of Contents
Advertisement
260 Display messages and warning and indicator lamps
Lights
Display messages
b
Check Left Low
Beam
(example)
b
Auto Lamps Inoperative
b
Auto Lamp Function
Inoperative
b
Malfunction See Opera-
tor's Manual
Indicator and warning lamps
Indicator and warning lamps on the instru‐
ment cluster
Some systems will perform a self-test when the
ignition is switched on. Some indicator and warn‐
ing lamps may briefly light up or flash. This
behavior is non-critical. These indicator and warn‐
ing lamps indicate a malfunction only if they light
up or flash after the engine has been started or
during a journey.
Possible causes/consequences and
* The corresponding light source is defective.
Have defective LED lights replaced at a qualified specialist work‐
shop.
Observe the notes on changing a bulb (
#
Replace the faulty bulb at the front (
#
(
page 83).
/
* The light sensor is faulty. The automatic driving lights are malfunc‐
tioning.
Switch the light functions on/off manually (
#
Consult a qualified specialist workshop.
#
* The light sensor is faulty. The automatic driving lights are malfunc‐
tioning.
Switch the light functions on/off manually (
#
Consult a qualified specialist workshop.
#
* The exterior lighting is malfunctioning.
Consult a qualified specialist workshop.
#
* Vehicles with trailer hitch: a fuse may be faulty.
* NOTE Electrical fuses
Observe the information in the supplement. You may oth‐
#
erwise fail to recognize dangers.
Check the fuses and replace any blown fuses (see "Fuse assign‐
#
ment" supplement).
If the display continues to show the message:
Consult a qualified specialist workshop.
#
M M
Solutions
page 80).
/
page 81) or rear
/
page 77).
/
page 77).
/
Advertisement
Table of Contents
