Menus And Submenus (Vehicles With Steering-Wheel Buttons) - Mercedes-Benz Metris 2021 Operating Instructions Manual

144 Instrument cluster and on-board computer
Cruise control
R
Service intervals
R
Setting the time and date
Press the 3 button to select the time and
#
date display.
Use the f or g button to set the hours and
#
press 3 to confirm.
Use the f or g button to set the minutes
#
and press 3 to confirm.
Use the f or g button to set the day and
#
press 3 to confirm.
Use the f or g button to set the month and
#
press 3 to confirm.
Use the f or g button to set the year and
#
press 3 to confirm.
The display shows the Settings
Menus and submenus (vehicles with steer‐
ing-wheel buttons)
Service menu
Overview
Use the = or ; button to select the
#
Service menu.
Depending on the equipment, you have the fol‐
lowing options in the Service menu:
Calling up display messages in the message
R
memory ( page 235).
/
Checking the tire pressure electronically or
R
restarting the tire pressure monitoring system
( page 209).
/
Calling up the service due date (ASSYST
R
PLUS) ( page 175)
/
Assistance menu
Use the = or ; button to select the
#
DriveAssist menu.
Depending on the vehicle's equipment, you have
the following options on the
Displaying the status overview
R
Showing the assistant display for Active Brake
R
Assist (
DISTRONIC (
Switching ESP
R
Switching Active Brake Assist on/off
R
( page 115).
/
Setting the sensitivity of ATTENTION ASSIST
R
( page 128)
/
Switching Blind Spot Assist on/off
R
( page 129)
/
Setting the sensitivity of Lane Keeping Assist
R
( / page 130)
menu again. Status overview
Status overview (example)
1
Blind Spot Assist switched on and active
2
Rear window wiper switched on
3
ATTENTION ASSIST switched on
4
Distance warning function of Active Brake
Assist switched on
5
Lane Keeping Assist switched on and ready
for use
Use the : or 9 button to select the
#
overview.
Press the a button.
#
The status overview shows only the symbols
of the driving systems or driving safety sys‐
tems that have been switched on.
The symbols for Blind Spot Assist and Lane
Keeping Assist may vary depending on the
system status:
If the symbol for Blind Spot Assist
R
does not show any radar waves between
the two vehicles, Blind Spot Assist has
been switched on but is not ready for use.
DriveAssist
/ page 113)or Active Distance Assist
page 120).
/
® on/off ( page 111, 112).
/
menu:
1