Ing-Wheel Buttons) - Mercedes-Benz Metris 2021 Operating Instructions Manual

138 Instrument cluster and on-board computer
1
È and 3 buttons
2
Multifunction display
3
f and g buttons
If you turn the key to position 1 in the ignition
lock, the on-board computer will be activated.
If you remove the key, then quickly re-insert it
and turn it to position 1, the on-board computer
and instrument cluster will not be activated.
You can control the display messages and set‐
tings in the on-board computer with buttons
and 3 on the instrument cluster.
Buttons on the instrument cluster
È Press briefly:
Selects the menu or display
R
In the Settings
R
submenu without adopting the last
setting and returns to the main
menu
Press and hold:
È
Returns to the standard display or
R
the Distance menu without adopt‐
ing the last setting
Press briefly:
3
Selects a submenu or function
R
Confirms the selected entry on the
R
list or the display, or confirms the
setting
3
fg
Overview and operation of the on-board
computer (vehicles with steering-wheel but‐
tons)
& WARNING Risk of distraction from infor‐
1
menu: exits the
You must observe the legal requirements for the
country in which you are currently driving when
operating the on-board computer.
Press and hold:
Resets the trip distance and trip
R
computer values
In the main menu of the
R
menu, resets to factory settings
In the Settings menu, resets values
R
and returns to the main menu
Sets the instrument lighting (not in
R
the Settings menu)
Scroll through lists
R
Change values or settings
R
mation systems and communications
equipment
If you operate information and communica‐
tion equipment integrated in the vehicle when
driving, you will be distracted from the traffic
situation. This could also cause you to lose
control of the vehicle.
Only operate this equipment when the
#
traffic situation permits.
If you cannot be sure of this, stop the
#
vehicle whilst paying attention to road
and traffic conditions and operate the
equipment with the vehicle stationary.
Settings