Table of Contents
Advertisement
Push in the catch spring of lamp housing
#
with a suitable object, e.g. a screwdriver, and
pry off lamp housing 1.
Turn socket
2
counter-clockwise and pull it
#
out of lamp housing 1.
Pull bulb
3
out of socket 2.
#
Push new bulb
3
into socket 2.
#
Screw socket
2
into the lamp housing
#
turning it clockwise.
Place lamp housing
1
#
and engage it.
Signal and ambient lamp in the tailgate
Push in the catch spring of the lamp housing
#
on the side of transparent lens
able object, e.g. a screwdriver, and pry off the
lamp housing.
Turn socket
3
counter-clockwise and pull it
#
out of the lamp housing.
Pull the bulb out of socket 3.
#
Push the new bulb into socket 3.
#
#
#
Switching the windshield wipers on and off
Requirements:
R
1
1
by
in position on the left
1 g Windshield wipers off
2 Ä Intermittent wiping, low
3 Å Intermittent wiping, high
4 ° Continuous wiping, slow
5 ¯ Continuous wiping, fast
#
#
#
2
with a suit‐
Light and vision
Screw socket
3
into the lamp housing by
turning it clockwise.
Place the lamp housing in position at the side
of red lens
1
and engage it.
Windshield wipers
The power supply has been switched on.
(low rain sensor sensitivity)
(high rain sensor sensitivity)
Turn the combination switch to the corre‐
sponding position 1 – 5.
Single wiping: push the button on the combi‐
nation switch in the direction of arrow 6.
To wash: push the button on the combination
switch in the direction of arrow
the second point of resistance.
85
6
as far as
Advertisement
Table of Contents
