Table of Contents
Advertisement
Depending on the vehicle's equipment, you have
the following options on the
In the
Instrument Cluster
R
the display options
In the
Time/Date
submenu, changing the
R
time and date
In the
Light
submenu, changing the settings
R
for exterior and interior lighting
In the
Vehicle
submenu, switching vehicle
R
functions on/off or adjusting them
Resetting the settings to
R
Use the = or ; button to select the
#
Settings
menu.
Instrument Cluster
submenu
Use the : or 9 button to select the
#
Instrument Cluster
submenu.
Press the a button.
#
In the
Instrument Cluster
the following options depending on the equip‐
ment:
Changing the unit of measurement for dis‐
R
tance
Changing the display language.
R
Selecting the permanent display in the
R
header of the display
Use the : or 9 button to select the
#
desired function.
Choose a setting.
#
Time/Date
submenu
Use the : or 9 button to select the
#
Time/Date
submenu.
Press the a button.
#
Use the : or 9 button to select the
#
desired function.
Press the a button.
#
Choose a setting.
#
Press the a button to confirm.
#
Light
submenu
Use the : or 9 button to select the
#
Light
submenu.
Instrument cluster and on-board computer 149
#
Settings
menu:
submenu, changing
Factory Setting
#
Vehicle
#
#
submenu, you have
#
Resetting the settings to factory settings
#
#
#
#
For safety reasons, not all functions will be reset.
The
permanent limiter can be adjusted only in the
Vehicle
Press the a button.
In the
Light
submenu, you have the following
options depending on the equipment:
Activating/deactivating the surround
R
lighting and switch-off delay time of the
exterior lighting
An activated
Surround Lighting:
works only in the dark and if the light
switch is in the à position.
Activating/deactivating the switch-off
R
delay time of the interior lighting
Choose a setting.
submenu
Use the : or 9 button to select the
Vehicle
submenu.
Press the a button.
In the
Vehicle
submenu, you have the follow‐
ing options depending on the equipment:
Setting the sensitivity of the rain sensor
R
You can find further information under
"Windshield wipers" (
/
Switching the automatic door lock on/off
R
You can find further information under
"Automatic locking mechanism"
(
page 46).
/
Activating/deactivating the acoustic lock‐
R
ing verification signal
Choose a setting.
Press the : or 9 button to select
tory
Setting.
Press the a button.
The
Reset All Settings?
function will be dis‐
played.
Press the : or 9 button to select Yes.
Press the a button.
Limit Speed (Winter Tires)
function of the
submenu.
function
page 85).
Fac-
Advertisement
Table of Contents
