Lincoln Electric VRTEX 360 Service Manual page 69

Hide thumbs Also See for VRTEX 360:
Table of Contents

Advertisement

F-12
Observe Safety Guidelines detailed in the beginning of this manual.
PROBLEMS
(SYMPTOMS)
The weld coupon image is a
different configuration than the
physical coupon.
The arm and/or table are different
than the visuals in the software.
When the check settings are
activated the incorrect settings
appear.
Holding the green button in does
not shut down the VRTEX
Sometimes the view in the helmet
seems to shake, wobble or jitter.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely,
contact the Lincoln Electric Service Department for technical troubleshooting assistance before you proceed.
Call 1-888-935-3878.
All manuals and user guides at all-guides.com
TROUBLESHOOTING AND REPAIR
POSSIBLE AREAS OF
MISADJUSTMENT(S)
Either the wrong coupon is on
FUNCTION PROBLEMS
the
stand
configuration as been selected
in the software.
Press the menu button and
select change coupon type.
Change the software selections
so that the images on the
screen match the hardware you
are using.
The software information may
be incorrect. Press the menu
button and select change
process. Make sure the images
on the screen match the
hardware being used.
Check the settings in the
Instructor Mode.
Make sure all of the settings are
correct for the process and
parameters being used. Check
for the acceptable ranges for the
Lincoln defaults.
To shut down the VRTEX
360
select menu and then select
TM
shutdown.
Make sure the helmet is close to
the work piece. The further the
helmet is from the work piece
the more jitter there may be in
the helmet display. Also make
sure there are not other objects
or
frequencies
interfering with the system.
See the Installation Section of
this manual.
CAUTION
VRTEX
N/A
or
the
wrong
N/A
N/A
360
N/A
TM
Check for loose or faulty
connections on the VGA cable
between the Relay Board and
the Polhemus Interface Module.
See the wiring diagram.
Perform
that
are
Interface Module Test.
TM
360
RECOMMENDED
COURSE OF ACTION
the
Polhemus
F-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ad1332-1Ad1332-2

Table of Contents