F-83
REMOVAL AND REPLACEMENT PROCEDURE (continued)
REPLACEMENT PROCEDURE
1. Install the new Display Board onto the three
mounting stand-offs.
2. Replace plug J37 previously removed from the
Display Board.
3. Close the control panel.
4. Install the two 3/8" screws previously removed
from the top of the control panel.
5. Turn on input power.
6. See the Retest After Repair.
All manuals and user guides at all-guides.com
TROUBLESHOOTING AND REPAIR
DISPLAY BOARD
FIGURE F.38 – DISPLAY LED BOARD PLUG LOCATION
PLUG J37
(VIEWED FROM REAR)
VRTEX
TM
360
F-83