Lincoln Electric VRTEX 360 Service Manual page 131

F-74
REMOVAL AND REPLACEMENT PROCEDURE (continued)
FIGURE F.31 – SHORTCUT TO START-UP SIM SCREEN SHOT
11. Click on the following in order:
• Start
• All Programs
• National Instruments
• Measurement and Automation
See Figure F.32.
• Devices and Interfaces (click "+")
• NI-DAQmx Devices
Right click: NI USB 6509; "Dev1"
Left click: Delete
Left click: NI USB 6509; "Dev2"
Right click: Rename to ("Dev1")
12. Press "Enter".
13. Exit out of program.
All manuals and user guides at all-guides.com
TROUBLESHOOTING AND REPAIR
INTERFACE MODULE DIGITAL I/O
FIGURE F.32 – NATIONAL INSTRUMENTS
VRTEX
14. Shut down the VRTEX
shutdown. Click:
• Start
• Turn off computer
• Turn off
15. Remove input power after CPU has complete-
ly shut down.
16. Disconnect the USB keyboard and mouse.
17. Perform
Case
Procedure.
18. Perform the
Monitor
Replacement Procedure.
19. See Retest After Repair.
TM 360
F-74
360 via a normal CPU
TM
Cover Replacement
and Pedestal