Lincoln Electric VRTEX 360 Service Manual page 105

F-48
POLHEMUS MODULE REMOVAL AND REPLACEMENT
REMOVAL PROCEDURE
1. Remove input power.
2. Perform the Monitor and Pedestal Removal
Procedure.
3. Perform the Case Cover Removal Procedure.
4. Locate the Polhemus Module. See Figure F.17.
5. Label all cables and connections for reassem-
bly. See Wiring Diagram.
6. Remove the five associated cables connected
to the Polhemus Module. Note and label the
locations before disconnecting.
F.18.
7. Carefully remove Polhemus Module from hori-
zontal mounting shelf. See Figure F.17.
NOTE: The Polhemus board is secured to the hor-
izontal mounting shelf with Hook & Loop
mounting pads.
All manuals and user guides at all-guides.com
TROUBLESHOOTING AND REPAIR
PROCEDURE (continued)
FIGURE F.17 – POLHEMUS MODULE LOCATION
See Figure
VRTEX
POLHEMUS MODULE
HORIZONTAL
MOUNTING
SHELF
TM 360
F-48