Lincoln Electric VRTEX 360 Service Manual page 125

F-68
ON BUTTON REMOVAL AND REPLACEMENT PROCEDURE (continued)
REMOVAL PROCEDURE
1. Remove input power.
2. Perform the Monitor and Pedestal Removal
Procedure.
3. Perform the Case Cover Removal Procedure.
4. Locate the ON Button. See Figure F.27.
5. Label and remove the four associated leads
(101B, 103A, 90, 91) from the ON Button. See
wiring diagram.
6. Remove switch from push button by pushing in
and turning a ¼ turn counter clockwise.
7. If necessary, remove the nut and push button
assembly from front panel.
All manuals and user guides at all-guides.com
TROUBLESHOOTING AND REPAIR
FIGURE F.27 – ON BUTTON LOCATION
VRTEX
ON BUTTON
TM 360
F-68