Offset Data Menu - Furuno DS-30 Operator's Manual

Item
Current Choose either data from nav sensor or water reference to calculate
Reference speed/direction of water current and wind when ground tracking is
not attainable.
Yes: Data from nav sensor is used when ground tracking is not
attainable.
No: Speed/direction of current and wind is measured with respect to
water mass in the water tracking depth, when ground tracking is not
attainable. When a GPS navigator is connected to the DS-30, it is
recommended that "Yes" is selected.
Data Interval Choose the data output interval to the external data recorder (option).
HED. Choose heading data interval for calculating rate of turn.
INTVL
ROT Set averaging time for "rate of turn" data.
AVERAGE

Offset Data Menu

Item
Trim Set ship's trim, that is, the relationship of the draft at bow and
stern. Use "+" polarity when the ship is down by the stern and
"-" polarity when it is down by the head.
Heel Set ship's heel, that is, lateral inclination. Use "+" polarity for
starboard up and "-" polarity for starboard down.
Description
PARAMETERS END
°
TRIM : +0.0
°
HEEL : +0.0
°
XDCR OFFSET : +0.0
°
COMPASS CORR : +0.0
°/min
R. O. T. ZERO : +0.0
°
GND TRL SPD : +0.0
°
WTR TRK SPED : +0.0
°
UKC OFFSET : +0.0
°
UKC OFFSET : +0.0
SPEED DIFF : EXECUTE?
Description
9-14
Factory setting in bold
Selection
1. Yes
2. No
1. 15 sec
2. 30 sec
3. 1 min
4. 2 min
5. 5 min
6. 10 min
7. 15 min
8. 30 min
1. 0sec
2. 10sec
3. 30sec
4. 60 sec
5. 90 sec
6. 120 sec
1. 0sec
2. 10sec
3. 30sec
4. 60 sec
5. 90 sec
6. 120 sec
Factory setting in bold
Selection
-12.5 to +12.5°
0.0°
-12.5 to +12.5°
0.0°