Table of Contents
Advertisement
11.7
Status Messages
Status messages appear at the screen center to alert the operator. These are as
below.
Status message
TX OFF
RAISE/LOWER
TEST*
* = Not displayed when TX is OFF.
11.8
Tests
A comprehensive diagnostic facility is provided for testing the equipment. If NG
(no good) or abnormal display appears in the test results for any test, contact
your dealer.
11.8.1
TEST menu
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select INITIAL SETTING and press the [MENU] key.
4. Select TEST and press the [MENU] key to open the TEST menu.
Status messages and their meanings
Meaning
Transmission turned off from the menu.
Raise/lower command received from the control unit in
normal operation, to manually test raise/lower switch in hull
unit. Raise/lower keys on the control unit are inoperative
during the hull unit test.
MENU
OTHERS
INITIAL SETTING
TEST
BOARD TEST...
: EXECUTE
PANEL TEST...
: EXECUTE
TEST PATTERN...
: EXECUTE
RX TEST...
: EXECUTE
NOISE TEST...
: EXECUTE
TX
: OFF
TEST menu
11. MAINTENANCE, TROUBLESHOOTING
QUIT
QUIT
QUIT
QUIT
11-7
Advertisement
Table of Contents
Troubleshooting
