4.
TURNING ON /OFF POWER
Turning On Power
Turning Off Power
Turn on the POWER switch at the display unit. In about seven
seconds, the message "FURUNO" appears on the screen and then 13
seconds later, the start-up test is executed.
30 seconds later
Normal Operation
During the start-up test, check that seven OKs are displayed. When an
NG (No Good) is displayed instead of OK, some circuit is faulty.
Contact Furuno Agent for technical support.
After the start-up test, that is, in about one minute after truing on
power, normal operation is started,
Note: If equipped with a rate-of-turn gyro (option), turn on DS-30
when the ship is stopped or cruising straightly.
Turn off the POWER switch at the display unit.
4-1