Tests; How To Display The Test Menu - Furuno FSV-25S Operator's Manual

8.11

Tests

A comprehensive diagnostic facility is provided for testing the equipment. If you feel
the equipment is not working properly, conduct the test to find the cause. Check that
the system is correctly connected before doing any test.
If NG (No Good) appears in the test results for any test, contact your dealer for advice.
8.11.1

How to display the Test menu

1. Press the MENU/ESC key to show the main menu.
2. Click [Others].
3. Click [Initial Setting]
4. Click [Changeable].
5. Click [Test].
Note: The menu item [TX] turns transmission on or off. Turn off transmission to iden-
tify the source of noise, for example.
Test
Operation Test ...
Board Test ...
Panel Test ...
Test Pattern ...
Dummy Test* ...
FAN MONITOR
TX
8. MAINTENANCE, TROUBLESHOOTING
Quit
: Execute
: Execute
: Execute
: Execute
: Execute
: Execute
: OFF
*For technician
8-11