Table of Contents
Advertisement
Key
V:H RANGE
AUTO
TRAIN
MENU
1.2
Remote Controller
The Remote Controller CH-343 enables control of the processor unit from a remote
location.
Raise/lower the
transducer.
Select display
mode.
Select center of
vertical fan mode/
direction of scanning.
Selects the width on
the transducer
training sector.
1.3
Turning the Power On/Off
Power on
Press the [PWR] switch on the main panel. The lamp above the switch lights to show
that power is turned on.
Power off
With the ship speed under 15 knots, retract the transducer with the [] key on the main
panel. The lamp above the key lights while the transducer is being raised and goes off
when the transducer fully raised. Then press the [PWR] switch.
Note: The transducer is automatically retracted into the tank even if the [PWR] switch
is pressed before retracting the transducer. However, for safety purpose, make it a
habit to retract the transducer before turning off the power.
Description
Changes the horizontal range scale in the vertical fan
mode.
Changes the auto and manual train in the vertical fan
mode.
Displays the menu screen of the mode in use.
RAISE/
LOWER
MODE
TRAIN
FULL/HALF
DISPLAY RANGE
1
2
CUSTOM MODE
C H - 3 4 3
C H - 3 4 3
REMOTE CONTROL
1. OPERATIONAL OVERVIEW
Selects Range.
RANGE
Tilt angle control/
Select center of
rotation in vertical
TILT
scanning.
3
Select fishing
ground.
Remark
3.3
3.4
1-3
Advertisement
Table of Contents
